iv Usage Hints
Except when adjusting the Recording belt, do not open
the recording mechanism of this equipment.
There is a risk of electric shock if you touch the high
voltage conductors.
Except when replacing the recording pens, do not open
the power supply rail cover.
There is a risk of electric shock if you touch the high
voltage conductors.
Do not dismantle or modify this equipment. Failure to
observe this warning may result in fire, electric shock, or
damage.
Do not place any vessels containing water or other
liquids, or metal objects, on top of this equipment.
If water is spilled on or metal objects fall into the
equipment there is a risk of fire, electric shock, or
damage.
Do not connect the main unit to any power source other
than that specified (85VAC to 265VAC, 50/60Hz).
Failure to observe this warning may result in fire, electric
shock, or damage.
Do not connect other than 24VDC to the power supply to
the power fail alarm.
Failure to observe this warning may result in fire, electric
shock, or damage.
Usage Hints
Alternating current
power supply
WARNING
To Next Page
Loading...
Need help?
General
