JRC JMA-3336 - System Time Clear; Scanner Time Clear

Chapter 4 ADJUST MENU SETTINGS
4.11 MAINTENANCE
4-72
4.11.2 SYSTEM TIME CLEAR
The system calculates and stores the total operating time of the display unit.
The operating time can be initialized.
 System Time Clear
1 Open Maintenance - System Time Clear .
Yes : Clears the operating time.
No : Does not clear.
4.11.3 SCANNER TIME CLEAR
The following operating time is calculated and stored in the scanner.
 Scanner Running Time
 Scanner Transmit Time
 Motor Rotating Time
Initialize those operating time above when magnetron or scanner motor is replaced.
 "Scanner Time Clear" operations
1 Open Maintenance - Scanner Time Clear .
"Scanner Time Clear" menu appears.