JRC JMA-3336 - Beacon (Dgps Receiver) Setting

Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
4-52
4.9.2 BEACON (DGPS RECEIVER) SETTING
Sets for a JRC Beacon (DGPS receiver).
This setting is available only for JRC Beacon (DGPS receiver) directly connected to the
connector for which "GPS" is engraved at the rear of the cabinet.
 Before adjustment
After operation, open "4. Send Data", and send the setting to the Beacon.
 "Beacon Setting" operations
1 Open GPS - Beacon Setting .
"Beacon Setting" menu appears.
 Selecting Beacon Station.
Sets the Beacon frequency mode.
1 Open Beacon Setting - Select .
"Select" menu appears.
Can set the Beacon station.
After setting, open "4. Send Data", and send the setting to the Beacon.