JRC JMA-3336 - Standby Numeric Display; Operation Numeric Display

Chapter 4 ADJUST MENU SETTINGS
4.13 DISPLAY SCREEN
4-95
4
NSTALLATION MANUAL
4.13.5 STANDBY NUMERIC DISPLAY
Switches on/off for numerical information display in standby state.
 Switching On/Off for Standby Numeric Display
1 Open Display Screen - Standby Numeric Display .
"Standby Numeric Display" menu appears.
Switches on/off.
4.13.6 OPERATION NUMERIC DISPLAY
Switches on/off for temporarily enlarging numerical information display in the following
operations.
 Cursor
 EBL
 VRM
 GAIN
 RAIN
 SEA
 Parallel cursor
 Monitor BRILL
 PRF Fine Tuning
1 Open Display Screen - Operation Numeric Display .
"Operation Numeric Display" menu appears.
Switches on/off.