Chapter 4 ADJUST MENU SETTINGS
4.3 RADAR ECHO
4-11
4
NSTALLATION MANUAL
Adjusting Main Bang Suppression Level and Main Bang Suppression Area
Press the cursor key or turn the [MULTI] control to set the Main Bang Suppression
Area value to "20".
Press the cursor key or turn the [MULTI] control to set the Main Bang Suppression
Level to allow main bang video to remain slightly on the display.
The Main Bang Suppression level can be set between 0 and 255.
Set the Main Bang Suppression Area value to overlap the suppression range with the
main bang.
To Next Page
Loading...
