JUKI DDL-900B - Machine Head Threading

– 14 –
1) Loosen setscrew ❶, and adjust the presser bar
height or the angle of the presser foot.
2) After adjustment, securely tighten the setscrew
❶.
❶
17. Adjusting the height of the presser bar
18. Threading the machine head
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
[NB type]
(Note)
Be sure to pass the thread
through the section
A
.
A