JUKI LU-1508H - Vertical Position of the Moving Knife; Adjusting the Knife Pressure

−31 −
3) Vertical position of the moving knife
4) Adjusting the knife pressure
①
②
③
④
⑤
③
④
0.3 to 0.4 mm
①
②
③
5.5 to 6.5 mm
0.5 ± 0.2 mm
Fig. 54
Fig. 55
Fig. 56
Fig. 58
Fig. 57
Moving knife shaft
To come in close contact
with each other
Conditions
• Moving knife comes in contact with counter knife.
• Driving arm comes in close contact with stopper plate.
Driving arm
◯ Initial position
Standard Adjustment