−1 −
1. SPECIFICATIONS
Item
Model name
Name of machine
Application
Sewing speed
Needle
Thread to be used
Thread to be trimmed
Stitch length
Lift of presser foot
Stitch adjusting method
Reverse feed method
Thread take-up lever
Needle bar stroke
Alternate vertical movement amount
Hook
Feed mechanism
Main shaft/hook driving shaft drive
Thread trimming method
Lubrication
Lubricating oil
Bed size
Free space for sewing
Handwheel size
Motor
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
LU-1510
1-needle, unison feed, lockstitch
machine (automatic lubrication)
Max. 2,500 rpm
–
Lever type
2.5 mm to 6.5 mm
Slot adjustment type
–
2P, 400W
Specifications
For heavy-weight materials
SCHMETZ 135 x 17 Nm 125 to 180 Standard : Nm 160
#30 to #5
Max. 9 mm (both normal/reverse feed)
Hand lifter : 9 mm Knee lifter : 16 mm
Dial method
Slide-type thread take-up lever
36 mm
Full-rotary vertical-axis 2.0-fold capacity hook (latch type)
Elliptic feed
Timing belt
Automatic (partial manual oiling)
JUKI New Defrix Oil No. 2
517 mm x178 mm
255 mm x 99 mm
Effective diameter of V belt section : ø93.3 mm
Outer diameter : ø160 mm
LU-1510-7
1-needle, unison feed, lockstitch
machine with automatic thread
trimmer (automatic lubrication)
Max. 3,000 rpm
#30 to #5
Air cylinder type
(With touch-back switch)
1 mm to 6.5 mm
Alternate vertical dial adjustment type
Cam-drive scissor trimming method
SC-380
To Next Page
Loading...
Need help?
General
