1. Upper looper thread, blue markings
Place the spool on the spool holder pin as illustrated.
(1) Bring the thread up from the spool and lay it from the back
to the front into the guide.
(2) Thread the first machine guide.
(3) Slip the thread through the groove.
(4,5,6,7,8) Thread the guides, 4&5, follow the slit guide 6 then
thread guide 7&8.
(9) Turn the handwheel towards you until upper looper is in
the position as illustrated.
Thread the looper eye and place the thread underneath
the presser foot.
Note:
Do not thread the upper looper when sewing with the upper
looper converter.
1
2
3
4
55
6
7
88
99
2
Threading 4/3 Thread OL
22
To Next Page
Loading...
