JUKI MO-735N - Right-Hand Needle

Threading 4/3 Thread OL
1
2
3
4
5
66
7
8
2
6
7
8
3. Right-hand needle, green markings
Place the spool on the spool holder pin as illustrated.
(1) Bring the thread up from the spool and lay it from the back
to the front into the guide.
(2) Thread the first machine guide.
(3) Slip the thread through the groove.
(4,5) Take the thread under the thread guide plate and
through the take up.
(6) Thread the guide.
(7) Thread the guide on the needle clamp.
(8) Thread the right needle from front to back.
(9) Place the thread underneath the presser foot.
Safety stitch (3-thread Overlock + Chain stitch / 2-thread Overlock + Chain
stitch)
* For the chain needle thread at the time of the safety stitch, use the route of left-hand
needle thread path(brown). Consequently, for the needle thread of 3-thread/2-thread
overlock, use the route of right-hand needle thread path (green).
For both left-hand and right-hand needles, use the route of right-hand needle thread
path for threading other than threading the needle eyelet.
6
7
8
24