Tension adjustments
Tension adjustments Cover stitch
The right needle thread forms loops on the underside:
Tighten the right needle (upper looper) tension (pink, R)
The center needle thread forms loops on the underside:
Tighten the right needle tension (pink, C).
The left needle thread forms loops on the underside:
Tighten the left needle tension (pink, L).
The looper thread is loose on the underside:
Tighten the looper tension (inside cloth plate, D) (purple).
Chain stitch
The needle thread forms loose loops on the underside:
Tighten the left needle tension (brown, F)
The looper thread is loose on the underside:
Tighten the looper tension (inside cloth plate, E) (purple).
Adjusting the presser foot
When making seams on swim, gymwear or similar material, this
with the cover stitch, shift the lever to the rear, presser foot pressure
on L. For normal use shift the lever to the front side.
E
F
D
R
C
L
42
To Next Page
Loading...
