JUKI SC-920 - Page 10

– 8 –
Connect motor output cord
󱢾
to connector
󱢿
locat-
ed on the side of the box.
CE 1ø 230V
AC
220V-240V
Installing power switch
Connect power supply cord to the power switch.
[CE specications]
Single phase 230V : Power supply cords :
Brown
,
Blue
,
and green/yellow (ground wire)
(Caution) 1. Be sure to prepare the power plug
which conforms to the safety stan-
dard.
2. Be sure to connect the earth cable
(green/yellow) properly.
Brown
Blue
Green / Yellow
(ground wire)
[For CE specications only]
󱢿
󱢾
12) Connect the power supply cord to the power plug
socket. Connect, as shown in the gure, the white
and black (and red) conductors or the brown and
blue conductors to the power supply side and the
green/yellow conductor to the grounding side.
(Caution) 1. Be sure to prepare the power plug
which conforms to the safety stan-
dard.
2. Be sure to connect the earth cable
(green/yellow) properly.
3ø 200V-240V
1ø 100V-120V
220V-240V
AC 200V-240V
Black
Red
White
Green / Yellow
(ground wire)
Black
White
Green / Yellow
(ground wire)
AC 100V-120V
AC 220V-240V