– 22 –
Table 2: Mode resetting operation
Mode name
Switch
❺
(held pressed for 2
seconds)
Switch
❺
(held pressed for 4 sec-
onds)
Target No. of pcs. display mode
(F100)
Resets the actual number of pieces
Resets the difference between
target number of pieces and actual
number of pieces
-
Target/actual No. of pcs. differ-
ence display mode (F200)
Resets the actual number of pieces
Resets the difference between
target number of pieces and actual
number of pieces
-
Sewing machine availability rate
display mode (F300)
Resets average availability rate of
sewing machine
Resets average availability rate of sew-
ing machine.
Resets average pitch time.
Resets average number of revolutions of
sewing machine.
Pitch time display mode (F400) Resets average pitch time Resets average availability rate of sew-
ing machine.
Resets average pitch time.
Resets average number of revolutions of
sewing machine.
Average number of revolutions
display mode (F500)
Resets average number of revolu-
tions of sewing machine.
Resets average availability rate of sew-
ing machine.
Resets average pitch time.
Resets average number of revolutions of
sewing machine.
Bobbin counter display mode Resets the bobbin counter value
(Note that only the bobbin counter
is immediately reset by pressing
switch
❺
.)
-
[Detailed setting of production volume management function (F101, F102)]
When
switch
❼
is held pressed
(for three seconds) under the target No.
of pcs. display mode (F100) or the target/
actual No. of pcs. difference display mode
(F200), the detailed setting of the produc-
tion volume management function can be
carried out.
The setting state of the number of times
of thread trimming (F101) and that of the
target achievement buzzer (F102) can be
changed over by pressing
switch
❸
or
switch
❹
.
The number of times of thread trimming for sewing one piece of garment can be set by pressing
switch
❺
or
switch
❻
in the setting state of the number of times of thread trimming (F101).
It is possible to set whether the buzzer sounds or not when the actual number of pieces has reached the target vol-
ume by pressing
switch
❺
or
switch
❻
in the setting state of the target achievement buzzer (F102).
❻
❺❹❸
❶
❷
❼
Ⓔ
To Next Page
Loading...
