Product description
22
5.7 Main menu
The [MENU] key is used to access the main menu. The Main menu is divided
into menu options, which respectively contain more submenus or in which
settings can be specified. The main menu can be exited by pressing the [OK]
key or by pressing the [MENU] key again.
The <Main menu> is divided into the following menu options:
• <IntE> Interface:
<rEM> Set up remote control mode
<con> Set interface parameters
• <Pu> Set pump capacity
• <tSEt> Set timer
• <SAFE> Safety:
<SP> Display for high temperature cut-off settings
<SF> Display for safety temperature sensor settings
<tHi> Set overtemperature warning
<tLo> Set subtemperature warning
• <Atc> Adjust temperature sensors (ATC):
<StA> Enable/disable adjustment
<tYPE> Set type of adjustment
<tt1> ... <tt3> Actual values of circulator
<Ct1> ... <Ct3> Correction value
• <con> Configure:
<AUto> Select/deselect autostart function
<hLiM> Set power supply
<cooL> Set chiller mode
<init>
Factory reset
• <dAtA> Data logging:
<LoG> Enable/disable data logging
<bb> Read out blackbox data
To Next Page
Loading...
