Julabo CORIO CD-B13 - Enabling ATC Function; Device Reset

Operation
56
7. In menu option <Atc>, use the arrow keys to select the correction point
<Ct1> and confirm with [OK].
8. Enter the read reference temperature and confirm with [OK].
 The display flashes briefly. The correction value <Ct1> is stored at the
current internal temperature value <tt1>.
9. If necessary, repeat steps 6 to 8 for a 2-point or 3-point adjustment.
 The temperature sensor is adjusted. The correction values are saved and can
be displayed in menu option <Atc>.
8.10.2 Enabling ATC function
For regular operation, the correction values saved for an adjustment can be
enabled in the menu.
 The device is switched on.
 Correction values are saved.
1. Press the [MENU] key.
2. Use the arrow keys to select the menu option <Atc> and confirm with
[OK].
3. Use the arrow keys to select the menu option <StA> and confirm with
[OK].
4. Use the arrow keys to select <On> and confirm with [OK].
 The display flashes briefly.
 The ATC function is activated. The stored correction values are offset
against the temperature measured internally.
8.11 Device Reset
The function resets the device to the factory settings.
1.
 The device is switched on.
1. Press the [MENU] key.
2. Use the arrow keys to select <conF> and confirm with [OK].
3. Use the arrow keys to select the menu option <init> and confirm with
[OK].
4. Use the arrow keys to select <YES> and confirm with [OK].
 The display flashes briefly.
 The device is reset to factory settings.
i