Julabo CORIO CD-B13 - IN Commands

Appendix
65
11.1.1 IN commands
IN commands retrieve device parameters.
Process values System response
in_pv_00
Actual value
in_pv_01
Current variable (%)
in_pv_03
Current temperature of the temperature safety sensor
in_pv_04
Current setting of the high temperature safety function
Setpoints and warning
limits
System response
in_sp_00
Set setpoint temperature
in_sp_03
Set high temperature warning limit
in_sp_04
Set low temperature warning limit
in_sp_07
Set pump stage (1… 5)
in_sp_27
Set pump setting
Device modes System response
in_mode_05
Operating mode set for temperature control system:
0 = Stop
1 = Start