Julabo FP52-SL - Page 65

SL
65


 Press the key if a parameter is to be retained. (prior to OK)
Level 2 Parameter-Level

or
•
The parameter flashes, switch by pressing
and

or
 The parameter flashes, switch by
pressing
and
 >no< Carry out an ATC calibration
 >yes< return to standard operation after
calibration.

•
The parameter flashes, switch by pressing
and
 A >1-point<, >2-point< or >3-point<
calibration can be carried out.

The value >TmpValue< is only indicated
 In addition the measured temperature
value >CalValue X< is saved during the
next step.

• The value flashes. Set by using the
numeric keypad and confirm by pressing
.
 If only a 1-point calibration is carried out, the following menu items are
not indicated anymore