EasyManua.ls Logo

Jungheinrich ERC-Z12 - Remove Battery by Lifting It Upwards (Truck with Wheel-Arm Lifting Device)

Jungheinrich ERC-Z12
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1001.GB
D 8
5.2 Remove battery by lifting it upwards (truck with wheel-arm lifting device)
– Withdraw the battery connector (3).
f
The battery cable of the truck must be laterally led outside. While removing the bat-
tery, make sure that the cable is not squeezed.
– Attach hoisting gear to the hoisting ears (9).
– Lift out the battery.
The re-assembly can be performed by reversing the above actions; pay attention to
the correct mounting position and battery connection.
39
1001.GB
D 8
5.2 Remove battery by lifting it upwards (truck with wheel-arm lifting device)
– Withdraw the battery connector (3).
f
The battery cable of the truck must be laterally led outside. While removing the bat-
tery, make sure that the cable is not squeezed.
– Attach hoisting gear to the hoisting ears (9).
– Lift out the battery.
The re-assembly can be performed by reversing the above actions; pay attention to
the correct mounting position and battery connection.
39

Table of Contents

Related product manuals