Jungheinrich ERC-Z12 - Indicators

E 19
0602.GB
6.3 Indicators
Status displays of the individual LEDs
– steady (red)
– steady (green)
– flashing red
– flashing green
–off
Keyboard error messages
The following errors are indicated by a red flashing LED:
– New master code is already operator code.
– New operator code is already master code.
– Operator code to be changed does not exist.
– Tried to change the operator code to an existing code.
– Operator code to be deleted does not exist.
– Code memory full.
LED (20) steady (red) Truck off (not ready for operation)
steady (green) Truck on (operating mode)
flashing red Truck with error message
flashing green Truck on (master mode)
LED (22) steady (green) Travel programme
flashing green Code change: old code, input
LED (23) steady (green) Travel programme
flashing green Code change: new code, first input
LED (24) steady (green) Travel programme
flashing green Code change: new code,
confirmation
E 19
0602.GB
6.3 Indicators
Status displays of the individual LEDs
– steady (red)
– steady (green)
– flashing red
– flashing green
–off
Keyboard error messages
The following errors are indicated by a red flashing LED:
– New master code is already operator code.
– New operator code is already master code.
– Operator code to be changed does not exist.
– Tried to change the operator code to an existing code.
– Operator code to be deleted does not exist.
– Code memory full.
LED (20) steady (red) Truck off (not ready for operation)
steady (green) Truck on (operating mode)
flashing red Truck with error message
flashing green Truck on (master mode)
LED (22) steady (green) Travel programme
flashing green Code change: old code, input
LED (23) steady (green) Travel programme
flashing green Code change: new code, first input
LED (24) steady (green) Travel programme
flashing green Code change: new code,
confirmation