Jungheinrich ERC-Z12 User Manual

0602.GB
E 6
3 Starting up the truck
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
The electronic driving and steering systems automatically control their functions. If an
error or fault occurs, the driving and steering functions are stopped.
f
Before the truck is restarted, it is required to perform the relevant troubleshooting ac-
tions.
Checks and operations to be performed before starting daily work
– Visually check the entire truck (especially the wheels and the load lifting device) for
visible damage.
– Check the steering play.
– Visual inspection of cable connection.
– Switch for safety switching height (18), visually inspect its cable connections and
magnetic fastening.
f
Do not operate the controller (8) when climbing on the truck.
.
18
18
8
0602.GB
E 6
3 Starting up the truck
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
The electronic driving and steering systems automatically control their functions. If an
error or fault occurs, the driving and steering functions are stopped.
f
Before the truck is restarted, it is required to perform the relevant troubleshooting ac-
tions.
Checks and operations to be performed before starting daily work
– Visually check the entire truck (especially the wheels and the load lifting device) for
visible damage.
– Check the steering play.
– Visual inspection of cable connection.
– Switch for safety switching height (18), visually inspect its cable connections and
magnetic fastening.
f
Do not operate the controller (8) when climbing on the truck.
.
18
18
8

Jungheinrich ERC-Z12 Specifications

General

Brand	Jungheinrich
Model	ERC-Z12
Category	Forklifts
Language	English