Jungheinrich ERC-Z12 - Checking the Electric Fuses

1001.GB
F 10
6.5 Checking the electric fuses
– Prepare the truck for the performance of servicing and maintenance operations
(refer to section 6.1).
– Open the front cover (refer to section 6.2).
– Check all fuses for correct ratings and possible damage according to the table and
exchange them, if required.
– Mount the front cover (refer to section 6.2).
Item Description Protection of: Value
5 F1 Total control fuse 10 A
6 1F1 Drive motor (in parallel to 1F10) 150 A
7 2F1 Pump motor 150 A
8 1F10 Drive motor (in parallel to 1F1) 40 A
9 6F1 Discharge indicator/operating hour meter 10 A
9
8
7 6
5
1001.GB
F 10
6.5 Checking the electric fuses
– Prepare the truck for the performance of servicing and maintenance operations
(refer to section 6.1).
– Open the front cover (refer to section 6.2).
– Check all fuses for correct ratings and possible damage according to the table and
exchange them, if required.
– Mount the front cover (refer to section 6.2).
Item Description Protection of: Value
5 F1 Total control fuse 10 A
6 1F1 Drive motor (in parallel to 1F10) 150 A
7 2F1 Pump motor 150 A
8 1F10 Drive motor (in parallel to 1F1) 40 A
9 6F1 Discharge indicator/operating hour meter 10 A
9
8
7 6
5