105
03.13 EN
4.18 Fitting additional attachments
WARNING!
Incorrectly connected attachments can cause accidents.
Attachments with incorrectly connected hydraulic attachments can result in accidents.
XAttachments must only be assembled and commissioned by trained, specialist
personnel.
XObserve the manufacturer’s operating instructions.
XBefore starting, check the fasteners are positioned correctly and securely and make
sure they are complete.
XBefore starting, make sure the attachment is working correctly.
Connect attachment hydraulically
Requirements
– Hydraulic replacement coupling depressurised.
– The exchange ports on the truck are marked ZH1 and ZH2.
– Attachment directions of movement defined to match the controls’ direction of
movement.
Procedure
• Depressurise the hydraulic replacement coupling.
• Attach the plug connector and engage it in position.
• Mark the controls with symbols that indicate their function.
The attachment is now hydraulically connected.
To Next Page
Loading...
Need help?
General
