165
03.13 EN
Closing the panel
Procedure
• Place the rear panel in position.
• Secure two quick release fasteners (200).
The rear panel is now closed.
4.4 Unlocking the engine bonnet
Unlocking the engine bonnet
Requirements
– For trucks with a closed cab open both cabin doors
before lifting the engine cover (o).
Procedure
• Set the steering column to the parking position (see
"Adjusting the steering wheel / steering column" on
page 71).
• Tilt the backrest forward, move the driver's seat
forward and lock it in position (see "Adjusting the driver’s seat" on page 68).
• Pull the lever (139) in the arrow direction (L) until the engine cover is unlocked.
The engine cover is now slightly open.
Engine cover emergency unlocking
Requirements
– The engine cover cannot be unlocked.
Procedure
• Open the floor plate by undoing the quick release
fasteners.
• Pull the cable (202) on the cover lock (201).
• Raise the engine cover until it engages in the first
stage.
L
F
139
202
201
To Next Page
Loading...
Need help?
General
