Juniper ACX1000 - Step 6: Perform Initial Software Configuration; Enter Configuration Mode

Figure 10: Connecng DC Power to the Router
Step 6: Perform Inial Soware Conguraon
IN THIS SECTION
Enter Conguraon Mode | 16
Congure User Accounts and Passwords | 17
Congure System Aributes | 18
Commit the Conguraon | 19
This procedure connects the router to the network but does not enable it to forward trac. For
complete informaon about conguring the router to forward trac, including examples, see the Junos
OS conguraon guides.
To congure the soware:
Enter Conguraon Mode
1. Verify that the router is powered on.
2. Log in as the “root” user. There is no password.
16