Juniper ACX7024 - Page 5

Clock Cable and Antenna Cable Specicaons
IN THIS SECTION
Clock Cable Specicaons | 5
Antenna Cable Specicaons | 7
Cabling Guidelines | 10
Clock Cable
Specicaons
IN THIS SECTION
TE Cable Specicaons | 6
Samtec Cable Specicaons | 7
The ACX7024 router supports an RG-58 clock cable that has an SMA male connector at one end and a DIN 1.0/2.3
connector at the other end.
We recommend the following Juniper-qualied clock cables:
• RG-58 cable from TE Connecvity (Part number: 2423629-4). For more informaon, see "TE Cable Specicaons"
on page 6.
• RG-58 cable from Samtec (Part number: RSP-228559-01). For more informaon, see "Samtec Cable Specicaons"
on page 7.
5