88 Allegro 2 Rugged Handheld Owner’s Manual
Barcode Connector Utility
The Barcode Connector
™
utility is a barcode wedge
program provided with the barcode scanner. Depending
on the conguration of your Allegro 2, it either loads
automatically when the handheld is turned on or you can
open it from the Home screen.
Note: If the program does not appear in the Home screen
favorites bar as shown above (lower right-hand corner), tap
the Windows Start screen key and nd it in the Start menu.
When the Barcode Connector utility loads, the main screen
appears:
You can select three options, depending on how you want
the Barcode Connector utility and barcode to behave
during startup and suspend. Tap on the check boxes to turn
options on or off.
To Next Page
Loading...
