Juniper CTP Series Hardware Guide

CHAPTER 5
Equipment Rack Requirements
IN THIS CHAPTER
CTP150 Rack Requirements | 23
CTP150 Mechanical Requirements | 23
CTP150 Space Requirements | 24
CTP150 Rack Installation | 24
CTP Cabling Recommendations | 25
CTP150 Rack Requirements
When allocating equipment rack space, consider the following:
•
Type of equipment racks recommended for the system
•
Number of equipment racks required to hold your current system configuration
•
Future expansion
Make sure that your distribution rack meets basic mechanical and space requirements and complies with
conventional standards. In the United States, use EIA-310-D Cabinets, Racks, Panels, and Associated Equipment,
September 1992.
RELATED DOCUMENTATION
CTP150 Mechanical Requirements | 23
CTP150 Space Requirements | 24
CTP150 Rack Installation | 24
CTP150 Mechanical Requirements
Follow these mechanical requirements for your rack:
23

Juniper CTP Series Specifications

General

Brand	Juniper
Model	CTP Series
Category	Server
Language	English