Registering Your Upgrade
To register your upgrade:
1. Locate the Access Install Base web page at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
2. Enter the following required information:
•
System Model Number
•
System Serial Number
•
Support/Level Service Part Number
•
Interface Card/Module Model Number—Include for replacement RTM
•
Interface Card/Module Serial Number—Include for replacement RTM
•
Support/Level Service Part Number
•
Company Name
•
Site Address
•
Where Equipment Will Be Moved
•
Authorized Contract Name, Phone, and Email
•
Name of the Upgrade—Enter the name of your upgrade kit:
CTP2000-RAM-RTM-UPG or CTP2000-RAM-UPG
3. Click Submit.
Related Procedures
The following procedures are referenced by the upgrade procedures.
•
Servicing the CTP2000 CPU on page 23
•
Installing or Replacing CTP2000 DRAM Memory Modules in the PP310 or PP332
CPU on page 23
•
Restoring BIOS Defaults for the CTPOS 7.0R1 and Later Upgrade (PP310) on page 24
•
Installing or Removing a CTP2000 Series CompactFlash Card on page 26
Copyright © 2015, Juniper Networks, Inc.22
Upgrading the CTP2000 Series Device to CTPOS 7.x
To Next Page
