Juniper CTP2024 Hardware Guide

CHAPTER 16
Powering On
IN THIS CHAPTER
Before You Power On the CTP2000 Platform | 115
Powering On the CTP2000 Platform | 116
Powering Off the CTP Platform | 119
Before You Power On the CTP2000 Platform
Before powering on the device, make sure you complete the following tasks. See the appropriate sections
for information about these tasks.
WARNING: Be sure the power source is turned off and the device is turned off before
you perform the installation tasks.
•
Installing a CTP Interface Module, Processor Module, or Clock Module on page 95
•
Cabling a CTP2000 T1/E1 Interface Module on page 111
•
Cabling the CTP Platform for DC Power on page 111
•
Setting Up Management Access on the CTP2000 Platform on page 121
RELATED DOCUMENTATION
Powering On the CTP2000 Platform | 116
Powering Off the CTP Platform | 119
115

Juniper CTP2024 Specifications

General

Brand	Juniper
Model	CTP2024
Category	Network Hardware
Language	English