Juniper EX4400 - Page 109

Table 51: AC Power Cord Specicaons for 1050-W and 1600-W Power Supplies for EX4400-24P,
EX4400-24MP, EX4400-48P, and EX4400-48MP Switches (Connued)
Country/
Region
Electrical Specicaons Plug Standards Juniper Model Number
South Africa 250 VAC, 10 A, 50 Hz SABS 164/1:1992 Type ZA/3 CBL-PWR-C15M-HITEMP-
SA
North America 125 VAC, 15 A, 60 Hz NEMA 5-15 Type N5/15 CBL-PWR-C15M-HITEMP-
US
Switzerland 250 VAC, 10 A, 50 Hz SEV 1011 / 6534-2 Type
12G
CBL-PWR-C15M-HITEMP-
SZ
United
Kingdom
250 VAC, 10 A, 50 Hz BS 1363/A Type BS89/13 CBL-PWR-C15M-HITEMP-
UK
CAUTION: You must use the AC power cord for the EX4400 switch with this switch
only. Do not use the cord with any other product.
CAUTION: Power cords must not block access to switch components.
PoE-bt Budget Planning
Table 52 on page 101 lists the PoE-bt power available in an EX4400-24P switch.
Table 52: PoE-bt Power Available in an EX4400-24P Switch
Power Supply Input Voltage Available PoE-bt Power
1 2
1050 W – 110 V 783 W
101