Juniper Junos OS User Manual

show security flow session extensive
root> show security flow session extensive
Flow Sessions on FPC5 PIC0:
Session ID: 100000001, Status: Normal
Flags: 0x8000052, 0x85a0000, 0x100,
Policy name: p/4
Source NAT pool: Null
Dynamic application: junos:UNKNOWN,
Encryption: Unknown
Application traffic control rule-set: INVALID, Rule: INVALID
Maximum timeout: 1800, Current timeout: 296
Session State: Valid
Start time: 422, Duration: 4
In: 15.0.0.10/3000 --> 20.0.0.10/3000;tcp,
Interface: ge-0/0/1.0,
Session token: 0x8, Flag: 0x21
Route: 0x0, Gateway: 15.0.0.10, Tunnel: 0
Port sequence: 0, FIN sequence: 0,
FIN state: 0,
Pkts: 1, Bytes: 104
Out: 20.0.0.10/3000 --> 15.0.0.10/3000;tcp,
Interface: ge-0/0/2.0,
Session token: 0x9, Flag: 0x20
Route: 0x0, Gateway: 20.0.0.10, Tunnel: 0
Port sequence: 0, FIN sequence: 0,
FIN state: 0,
Pkts: 0, Bytes: 0
Total sessions: 1
show security flow session summary
root> show security flow session summary
Flow Sessions on FPC4 PIC1:
Unicast-sessions: 0
Multicast-sessions: 0
Failed-sessions: 0
Sessions-in-use: 0
Valid sessions: 0
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Maximum-sessions: 819200
Flow Sessions on FPC5 PIC0:
Unicast-sessions: 1
Multicast-sessions: 0
Failed-sessions: 0
Sessions-in-use: 1
Valid sessions: 1
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Maximum-sessions: 819200
Flow Sessions on FPC5 PIC1:
Unicast-sessions: 0
Multicast-sessions: 0
Failed-sessions: 0
Sessions-in-use: 0
113Copyright © 2016, Juniper Networks, Inc.
Chapter 12: Operational Commands

Juniper Junos OS Specifications

General

Brand	Juniper
Model	Junos OS
Category	Network Hardware
Language	English