Juniper Junos OS User Manual

show security idp status
Syntax show security idp status
Release Information Command introduced in Junos OS Release 9.2. Multiple detector information introduced
in Junos OS Release 10.1. Output changed to support IDP dedicated mode in Junos OS
Release 11.2.
Description Display the status of the current IDP policy.
Required Privilege
Level
view
Related
Documentation
Security Configuration Statement Hierarchy on page 75•
List of Sample Output show security idp status on page 117
Output Fields Table 14 on page 116 lists the output fields for the show security idp status command.
Output fields are listed in the approximate order in which they appear.
Table 14: show security idp status Output Fields
Field DescriptionField Name
Status of current IDP policy.State of IDP
The aggregated throughput (packets per second) for the system.Packets/second
The aggregated throughput (kilobits per second) for the system.KBits/second
• min—Minimum delay for a packet to receive and return by a node in microseconds.
• max—Maximum delay for a packet to receive and return by a node in microseconds.
• ave—Average delay for a packet to receive and return by a node in microseconds.
Latency
Statistics for ICMP, TCP, and UDP packets.Packet Statistics
Flow-related system statistics for ICMP, TCP, and UDP packets.Flow Statistics
Session-related system statistics for ICMP, TCP, and UDP packets.Session Statistics
Number of current SSL sessions.Number of SSL Sessions
Name of the running policy. If IDP is configured for logical systems, idp-policy-combined
is displayed.
Policy Name
Current version of the running detector.Running Detector Version
IDP dedicated mode: default, equal, idp, or firewall.Forwarding process mode
Copyright © 2016, Juniper Networks, Inc.116
Getting Started Guide for Branch SRX Series

Juniper Junos OS Specifications

General

Brand	Juniper
Model	Junos OS
Category	Network Hardware
Language	English