show security nat destination summary
Syntax show security nat destination summary
<logical-system (logical-system-name | all)>
<root-logical-system>
Release Information Command introduced in Junos OS Release 9.2. Support for IPv6 logical systems added
in Junos OS Release 12.1X45-D10.
Description Display a summary of Network Address Translation (NAT) destination pool information.
Options none—Display summary information about the destination NAT pool.
logical-system (logical-system-name | all)—Display summary information about the
destination NAT for the specified logical system or for all logical systems.
root-logical-system—Display summary information about the destination NAT for the
master (root) logical system.
Required Privilege
Level
view
Related
Documentation
pool (Security Destination NAT)•
• rule (Security Destination NAT)
• Security Configuration Statement Hierarchy on page 75
List of Sample Output show security nat destination summary on page 119
Output Fields Table 15 on page 118 lists the output fields for the show security nat destination summary
command. Output fields are listed in the approximate order in which they appear.
Table 15: show security nat destination summary Output Fields
Field DescriptionField Name
Number of destination NAT pools.Total destination nat pool number
Name of the destination address pool.Pool name
IP address or IP address range for the pool.Address range
Name of the routing instance.Routing Instance
Port number.Port
Number of IP addresses that are in use.Total
Number of IP addresses that are free for use.Available
Number of destination NAT rules.Total destination nat rule number
Copyright © 2016, Juniper Networks, Inc.118
Getting Started Guide for Branch SRX Series
To Next Page
Loading...
Need help?
General
