CHAPTER 2
Understanding Factory Default
Configuration Settings
•
Understanding Factory Default Configuration Settings of an SRX210 on page 7
•
SRX210 Factory Default Settings—A Sample on page 10
Understanding Factory Default Configuration Settings of an SRX210
This topic includes the following sections:
•
Default Configuration Topology on page 7
•
Default Port Settings on page 8
•
Default Settings for Interfaces, Zones, Policy, and NAT on page 9
•
Default System Services on page 10
•
Autoinstallation on page 10
Default Configuration Topology
Figure 1 on page 8 provides a topology of a simple network consisting of the SRX210.
NOTE: This document describes how to set up a basic configuration for a
branch SRX Series Services Gateway for the first time. This document uses
an SRX210 Services Gateway as an example. For additional details, see the
SRX210 Services Gateway Hardware Guide at SRX210 Services Gateway
Hardware .
7Copyright © 2016, Juniper Networks, Inc.
To Next Page
Loading...
