Juniper Junos OS User Manual

da-3-ipv6: 2400:0d78:0/24
da-4-wc: 192.168.22.11/255.255.0.255
Source identities: role1, role2, role4
Applications: any
Action: permit, application services, log, scheduled
Application firewall : my_ruleset1
Policy: p2, State: enabled, Index: 5, Sequence number: 2
Source addresses:
sa-1-ipv4: 2.2.2.0/24
sa-2-ipv6: 2001:0db8::/32
sa-3-ipv6: 2001:0db6/24
Destination addresses:
da-1-ipv4: 2.2.2.0/24
da-2-ipv6: 2400:0af8::/32
da-3-ipv6: 2400:0d78:0/24
Source identities: role1, role4
Applications: any
Action: deny, scheduled
show security policies policy-name p1 detail
user@host> show security policies policy-name p1 detail
Policy: p1, action-type: permit, State: enabled, Index: 4
Description: The policy p1 is for the sales team
Sequence number: 1
From zone: trust, To zone: untrust
Source addresses:
sa-1-ipv4: 2.2.2.0/24
sa-2-ipv6: 2001:0db8::/32
sa-3-ipv6: 2001:0db6/24
sa-4-wc: 192.168.0.11/255.255.0.255
Destination addresses:
da-1-ipv4: 2.2.2.0/24
da-2-ipv6: 2400:0af8::/32
da-3-ipv6: 2400:0d78:0/24
da-4-wc: 192.168.22.11/255.255.0.255
Source identities:
role1
role2
role4
Application: any
IP protocol: 0, ALG: 0, Inactivity timeout: 0
Source port range: [0-0]
Destination port range: [0-0]
Destination Address Translation: drop translated
Application firewall :
Rule-set: my_ruleset1
Rule: rule1
Dynamic Applications: junos:FACEBOOK, junos:YSMG
Dynamic Application groups: junos:web, junos:chat
Action: deny
Default rule: permit
Session log: at-create, at-close
Scheduler name: sch20
Per policy TCP Options: SYN check: No, SEQ check: No
Policy statistics:
Input bytes : 18144 545 bps
Initial direction: 9072 272 bps
Reply direction : 9072 272 bps
Output bytes : 18144 545 bps
Initial direction: 9072 272 bps
Copyright © 2016, Juniper Networks, Inc.124
Getting Started Guide for Branch SRX Series

Juniper Junos OS Specifications

General

Brand	Juniper
Model	Junos OS
Category	Network Hardware
Language	English