unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
fe-0/0/7 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
vlan {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
}
protocols {
stp;
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
13Copyright © 2016, Juniper Networks, Inc.
Chapter 2: Understanding Factory Default Configuration Settings
To Next Page
Loading...
