Juniper M120 - SONET;SDH Oc192 C;Stm64 PIC with XFP

SONET/SDH OC192c/STM64 PIC with XFP
■
JUNOS 8.3 and later (Type 3)Software release
■
One OC192 port
■
Power requirement: 0.52A @ 48 V (25 W)
Description
■
Multiplexing and demultiplexing
■
Rate policing on input
■
Rate shaping on output
■
Packet buffering, Layer 2 parsing
Hardware features
■
SONET/SDH framing
■
Link aggregation
■
Alarm and event counting and detection
■
Dual-router automatic protection switching (APS)
■
Multiprotocol Label Switching (MPLS) fast reroute
■
Encapsulations:
■
High-Level Data Link Control (HDLC)
■
Frame Relay
■
Circuit cross-connect (CCC)
■
Translational cross-connect (TCC)
■
Point-to-Point Protocol (PPP)
Software features
108 ■ SONET/SDH OC192c/STM64 PIC with XFP
M120 Internet Router PIC Guide