Adaptive Services II Layer 2 Services PIC
■
JUNOS 8.0R2 and later (Type 1)
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
■
Supports Layer 2 Service package only. Tunnel services are included with the PIC. Other
services require an individual license.
■
Power requirement: 0.4 A @ 48 V (19 W)
Description
■
Support for up to 2000 service sets
■
Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Hardware features
Depending on your JUNOS release and individual licenses, software features for this PIC can
include the features listed in Table 8 on page 18. For more information about the software
features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.
Software features
Status LED, one tricolor:
■
Off—PIC is offline and it is safe to remove it from the chassis.
■
Green—PIC is operating normally.
■
Amber—PIC is initializing.
■
Red—PIC has an error or failure and no further harm can be done by removing it from
the chassis.
Application LED, one bicolor:
■
Off—Service is not running.
■
Green—Service is running under acceptable load.
■
Amber—Service is overloaded.
LEDs
Adaptive Services II Layer 2 Services PIC ■ 17
Adaptive Services II Layer 2 Services PIC
To Next Page
Loading...
