Juniper M120 - SONET;SDH Oc48 C;Stm16 PIC with SFP

SONET/SDH OC48c/STM16 PIC with SFP
■
JUNOS 8.0R2 and later
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
■
Four OC48 ports
■
Power requirement: 0.86 A @ 48 V (41.4 W)
Description
■
Multiplexing and demultiplexing on the 1-port PIC
■
Rate policing on input
■
Rate shaping on output
■
Packet buffering, Layer 2 parsing
Hardware features
■
Optical diagnostics and related alarms
■
SONET/SDH framing
■
Link aggregation
■
Alarm and event counting and detection
■
Dual-router automatic protection switching (APS)
■
Multiprotocol Label Switching (MPLS) fast reroute
■
Encapsulations:
■
High-Level Data Link Control (HDLC)
■
Frame Relay
■
Circuit cross-connect (CCC)
■
Translational cross-connect (TCC)
■
Point-to-Point Protocol (PPP)
Software features
SONET/SDH OC48c/STM16 PIC with SFP ■ 99
SONET/SDH OC48c/STM16 PIC with SFP