Juniper M120 - SONET;SDH OC48;STM16 (Multi-Rate) PIC with SFP

SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP
■
JUNOS 8.3 and later (Type 2)Software release
■
Rate-selectable using one of the following rates:
■
1-port OC3c
■
1-port OC12
■
1-port OC12c
■
1-port OC48
■
1-port OC48c
■
Power requirement: 0.20 A @ 48 V (9.5 W)
Description
■
Multiplexing and demultiplexing
■
Rate policing on input
■
Rate shaping on output
■
Packet buffering, Layer 2 parsing
Hardware features
■
Optical diagnostics and related alarms
■
Per-port SONET/SDH framing
■
Link aggregation
■
Alarm and event counting and detection
■
Dual-router automatic protection switching (APS)
■
Multiprotocol Label Switching (MPLS) fast reroute
■
Encapsulations:
■
High-Level Data Link Control (HDLC)
■
Frame Relay
■
Circuit cross-connect (CCC)
■
Translational cross-connect (TCC)
■
Point-to-Point Protocol (PPP)
Software features
SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP ■ 103
SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP