EasyManua.ls Logo

Juniper M120 - M120 Midplane Description

Juniper M120
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Channelized E1 IQ PIC
JUNOS 8.0R2 and later (Type 1)
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
Ten E1 ports
Power requirement: 0.15 A @ 48 V (7.2 W)
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface.
Channelization: E1, DS0
Description
Data service unit (DSU) functionality
Ports configurable as clear channel E1 interfaces with 2.048-Mbps connectivity
Supports unframed E1 G.703 and G.704 framing modes
Supports HDB3 line coding
CRC4 configurable
Local and remote loopback testing
Hardware features
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
Simple Network Management Protocol (SNMP): E1 MIB, DS0 MIB
Dynamic, arbitrary channel configuration
Full bit error rate test (BERT)
Encapsulations:
High-Level Data Link Control (HDLC)
Frame Relay
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)
Software features
Channelized E1 IQ PIC 35
Channelized E1 IQ PIC

Other manuals for Juniper M120

Related product manuals