Juniper M120 Pic Guide

Table 4: Optical Interface Support for 10-Gigabit Ethernet cFPC (continued)
10-GBASE-Z10-GBASE-E10-GBASE-L10-GBASE-SParameter
9/125 SMF cable:
49.6 miles/80 km
9/125 SMF cable:
24.8 miles/40 km:
Distances greater than
30 km are considered
to be engineered
links.
9/125 SMF cable:
6.2 miles/10 km
50/125 MMF cable,
2000 Mhz-Km:
984 feet/300 m
50/125 MMF cable,
500 Mhz-Km:
269 feet/82 m
50/125 MMF cable,
400 Mhz-Km:
217 feet/66 m
62.5/125 MMF cable,
200 Mhz-Km:
108 feet/33 m
62.5/125 MMF cable,
160 Mhz-Km:
85 feet/26 m
Maximum distance
1530 through
1565 nm
1530 through
1565 nm
1260 through
1355 nm
840 through 860 nmTransmitter wavelength
0 through 4 dBm–4.7 through 4 dBm–4 through 0.5 dBm–4.5 through –1 dBmAverage launch power
–24.0 through
–7.0 dBm
–15.8 through
–1.0 dBm
–14.4 through
0.5 dBm
–9.9 through
–1.0 dBm
Average receive power
–7 dBm–1.0 dBm0.5 dBm–1.0 dBmReceiver saturation
–24 dBm–15.8 dBm–14.4 dBm–9.9 dBmReceiver sensitivity
The SONET/SDH OC192/STM64 cFPC supports the XFPs listed in Table 5 on page 7.
Table 5: Optical Interface Support for SONET/SDH OC192/STM64 cFPC
Long Reach (LR) 2
Intermediate reach
(IR) 2Short reach (SR) 1Parameter
XFP-10G-Z-OC192-LR2.XFP-10G-E-OC192-IR2XFP-10G-L-OC192-SR1Transceiver model number
Single-modeSingle-modeSingle-modeOptical interface
XFPXFPXFPTransceiver type
Telcordia GR-253
OC192 LR2
Telcordia GR-253
OC192 IR2
Telcordia GR-253
OC192 SR1
Standard
FPCs and cFPCs Supported ■ 7
FPCs and cFPCs Supported

Juniper M120 Specifications

General

Brand	Juniper
Model	M120
Category	Network Router
Language	English