10-Gigabit Ethernet PIC with XENPAK
■
10-Gigabit Ethernet PIC with XENPAK: JUNOS 8.0R2 and later (Type 3)
■
XENPAK-OTN transceivers: JUNOS 9.0R2 and later
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
■
One 10-Gigabit Ethernet port
■
Power requirement: 0.55 A @ 48 V (26.6 W)
■
Supports large Ethernet frame sizes for more efficient throughput across the intra-POP
network
■
Optical interface support—See Table 19 on page 74 and Table 20 on page 75
Description
■
High-performance throughput at speeds up to 10 Gbps
■
Full-duplex mode
■
Maximum transmission units (MTUs) up to 9192 bytes
■
64 source MAC address filters
■
960 destination MAC filters
Hardware features
■
Virtual Router Redundancy Protocol (VRRP) support
■
802.1q virtual LANs (VLANs) support
■
802.3ae link aggregation support
■
RMON EtherStats
■
Optical diagnostics and related alarms :
■
Transceiver temperature
■
Laser bias current
■
Laser output power
■
Receive optical power
Software features
10-Gigabit Ethernet PIC with XENPAK ■ 73
10-Gigabit Ethernet PIC with XENPAK
To Next Page
Loading...
