Ch 8 Barcode Scanner 81
1) One Discrete Length – Set A to the discrete length
and B to 0. Only barcodes with an exact length of A are
decoded.
2) Two Discrete Lengths – Set A greater than B (both non-
zero). Only barcodes with lengths A or B are decoded.
3) Length Within Range – Set A less than B (both non-zero).
Barcodes between and including A and B are decoded.
4) Any length – Set A to 0. Any barcode length is decoded.
Composite/Postal Code Types Tab
The Composite/Postal Code Types tab has the following functions:
Composite Codes - Enable or disable composite code types.
Postal Codes - Enable or disable postal code types.
To Next Page
Loading...
