Juniper MX10008 - Page 52

corner of each fan tray. Figure 24 on page 53 shows the location of the LEDs on the JNP10008-FAN fan
tray. See Figure 25 on page 53.for the location of LEDs on the JNP10008-FAN2 fan tray.
Figure 24: Fan Tray JNP10008-FAN LEDs on an MX10008 Router
3—1— SFB status (SFB 0 through SFB 2 for the left fan tray
and SFB 3 through 5 for the right fan tray). The
hardware label for SFB status is SIB STATUS.
Fan status LED
2—Fan tray controller status
Figure 25: Fan Tray JNP10008-FAN2 LEDs on an MX10008 Router
g100655
31 2
3—1— SFB status (SFB 0 through SFB 2 for the left fan tray
and SFB 3 through 5 for the right fan tray). The
hardware label for SFB status is SIB STATUS.
Fan status LED
2—Fan tray controller status
53