Juniper MX10008 - Page 57

are located on the right of the controller panel. Figure 26 on page 58 shows the location of the LEDs on
the fan tray controller panel.
Figure 26: JNP10008-FAN-CTRL LEDs on an MX10008 Router
2—1— Fan tray controller statusFan tray controller power
Table 12 on page 58 describes the functions of the fan tray controller LEDs.
Table 12: Fan Tray Controller LEDs on an MX10008 Router
DescriptionStateColorName
The fan tray controller has power and is
operating normally.
On steadilyGreenFan controller power
A power error has been detected in the
fan tray controller. Replace the fan tray
controller as soon as possible. To maintain
proper airflow through the chassis, leave
the fan tray installed in the chassis until
you are ready to replace the fan tray
controller.
BlinkingYellow
The fan tray controller is not powered on
or is not receiving power.
OffNone
58