Table 41: Power LED
DescriptionStateColor
There is no power to the line card.OffUnlit
The line card has power.On steadilyGreen
The line card has a power fault.BlinkingYellow or amber
Table 42: Status LED
DescriptionStateColor
The line card is offline or disabled.OffUnlit
The line card is online.On steadilyGreen
The line card is booting.On steadilyYellow or amber
The line card has a fault condition or alarm.Blinking
The beacon function is enabled.Slow blink or blip
Offline Button
The offline/online button is recessed below the faceplate directly below the status (STS) LED. You can
take the PTX10K-LC1105 offline or online by using either of these two methods:
•
Press the OFF button with a pin tool, such as a paperclip, until the STS LED goes out (about 5 seconds).
•
Issue the CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot offline
Port Status and Activity LEDs
Each QSFP28 port has a bi-colored up or down LED indicator that show port status and link activity. See
Figure 60 on page 137 and Table 43 on page 137.
136
To Next Page
Loading...
