Juniper PTX10008 - Page 174

“JNP10K-PWR-AC2 Power Cable Specifications for 30-A Input” on page 178 shows cables and connectors
for 30-A input.
•
20-A input with 3000 W output
Table 63 on page 176 shows cables appropriate for 20-A input.
WARNING: Do not run JNP10K-PWR-AC2 power supplies using 20-A cables if connected
to 30-A input.
Table 63: JNP10K-PWR-AC2 Power Cable Specifications for 20-A Input
Graphic
Spare Juniper
Model NumberPlug StandardsCord Set RatingLocale
CBL-JNP-SG4-ARIRAM 2073 Type
RA/3
16 A, 250 VACArgentina
CBL-JNP-SG4-AUAS/NZS 441715 A, 250 VACAustralia and New
Zealand
g050616
CBL-JNP-SG4-BRNBR 14136 Type
BR/3
16 A, 250 VACBrazil
CBL-JNP-SG4-CHGB209916 A, 250 VACChina
g100342
CG_CBL-APP-400-02IEC 316P6W20 A, 250 VACEurope (except Italy,
Switzerland, and
United Kingdom)
CBL-JNP-SG4-UKBS136313 A, 250 VAC,Great Britain
176