Table 76: PTX10000 Rack Mount Kit (continued)
QuantityComponent
1Left base bracket
6. Compare the contents of the front panel kit with Table 77 on page 206.
Table 77: PTX10000 Front Panel Kit
QuantityComponent
1Front panel
1Left base bracket
1Right base bracket
2Latch brackets
8Phillips flat-head screws
1Documentation Roadmap Card
SEE ALSO
PTX10008 Components and Configurations | 35
PTX10016 Components and Configurations
Installing the Mounting Hardware for a PTX10000
The router can be installed in a four-post closed frame rack or a four-post open frame rack. Install the
mounting hardware on the rack before installing the router.
To mount the chassis on a four-post rack, you must first install the mounting hardware in the rack. The
PTX10008 and PTX10016 routers come with a four-piece set of brackets that supports the chassis in the
rack. The rack mount kit, EX-MOD-RMK-4POST, can be ordered as a spare.
206
To Next Page
Loading...
