Juniper PTX10008 - Page 215

NOTE: The right and left base bracket cannot be interchanged (see Figure 85 on page 218).
Figure 85: Front Panel Mounting Hardware
g050602
2
1
3
3—1— Left base bracketLatch brackets
2—Right base bracket
4. Use the Phillips screwdriver to attach two mounting screws to the right base bracket at the bottom
right side of the chassis frame.
5. Use the Phillips screwdriver to attach two mounting screws to the latch bracket at the top left of the
chassis frame (see Figure 86 on page 219 for PTX10008 and PTX10016 installations).
218